Exchange Litecoin to Rubles

Litecoin to ruble rate

The price of LTC moves with the market, so the ruble exchange rate is not fixed either. The chart shows the movement of the coin itself, while the rate for this direction is shown in the block below it.

Litecoin LTC→Sberbank RUB

Exchange rate, 1 LTC =

4,246.28 RUB

Exchange data as of November 9, 2026 · floating rate

Minimum amount

0.746 LTC

Maximum amount

14,926 LTC

Reserve

265,717,785.08 RUB

The rate floats and is finally locked when your transfer receives the required number of confirmations on the network. If the amount matters to you in advance, enable the paid “Fixed rate” option in the form.

Litecoin to rubles exchanger

BTCChange24 is an exchanger where you can exchange Litecoin (LTC) for rubles and receive the payout to a Sberbank card. This direction does not run automatically: an operator processes every order.

Prepare everything you need for the order in advance:

• LTC in a wallet or on an exchange from which the coins can be withdrawn;
• a Sberbank card and the exact details of its owner: card number and full name;
• the phone number linked to the card, a contact in Telegram or WhatsApp, and a valid e-mail.

Exchange LTC for rubles

Open the exchange form, choose Litecoin LTC and RUB in it, and enter the amount. The form will calculate how many rubles you will receive before the order is created.

The final result depends on the exchange amount, the moment the rate is locked, and the paid options you select. The exchange terms, including the required number of confirmations, are described in the site rules.

How many rubles you will get for your Litecoin

Enter the amount of LTC into the calculator, and it will show the approximate sum in rubles. For the amounts people choose most often, the figures are also collected in a table.

You sendLTC

You receive

≈ 42,462.75

RUB

Go to exchange

Rate for this amount: 1 LTC = 4,246.27 RUB

Why the same LTC amount gives different results in different rows

The rate for this direction depends on the exchange amount: at a different volume it may be different. That is why each row of the table is calculated separately.

The result is approximate. The final amount is determined at the moment the rate is locked after the network confirmations.

How to exchange Litecoin for a card

You create an order, send LTC to the address shown, and receive rubles on your card. The process has three steps.

1. 1

   Create an order

   Choose the pair in the exchange form, enter the amount, and fill in the card details and contacts.

   You send

   Litecoin10 LTC

   You receive

   Sberbank≈ 42,462.75 RUB

   Recipient details

   • Card number
   • Cardholder's full name
   • Linked phone number
   • Telegram or WhatsApp
   • E-mail

   Create order
2. 2

   Send LTC

   Transfer the exact amount to the address shown in the order.

   Send exactly

   10 LTC

   To the address in your order

   The address appears once the order is created

   Waiting for network confirmations
3. 3

   Receive the payout

   The operator will process the order and send the rubles to your card.

   Payout sent

   ≈ 42,462.75 RUB

   to your Sberbank card

   Payout time: 30 minutes to 72 hours

Step 1. Create an order

In the exchange form, choose Litecoin LTC and the ruble card RUB, then enter an amount from 0.746 LTC to 14,926 LTC. The amount to receive and the rate 4,246.28 will appear on the screen before you create the order. The exchanger charges no separate fee: it is already included in the rate.

Go to the LTC → RUB exchange

Then fill in the order fields:

• card number;
• full name of the cardholder;
• linked phone number;
• Telegram or WhatsApp;
• e-mail.

Before you confirm, double-check the amount and the card details. An error in the details may delay the payout.

Step 2. Send LTC

After the order is created, the site will show the address and the amount. Send exactly this amount to exactly this address.

• Copy the whole address, and after pasting, compare its first and last characters with the order.
• When withdrawing from an exchange or wallet, account for the network or exchange fee: the amount of LTC stated in the order must reach the exchanger.
• Save the transaction hash (TXID): it makes it easier for support to find your transfer.

Step 3. Receive the rubles

Once the network confirms the transfer, the operator will process the order and send the rubles to your card. The payout takes 30 minutes to 72 hours. You can ask about the order status in the support chat on the site or in Telegram.

Amount limits and ruble reserve

One order accepts from 0.746 LTC to 14,926 LTC.

The reserve is the rubles the exchanger has available for payouts in this direction. It is currently 265,717,785.08 RUB. If your amount goes beyond the limits or exceeds the reserve, the form will tell you, and support will advise you on what to do.

How long to wait for rubles after sending LTC

The exchange time has two parts: first the network confirms your transfer, then the operator processes the order manually.

Network confirmations

Until the transfer receives the required number of confirmations, the rate stays floating and the order does not move forward. The required number is listed in the rules. The speed depends on network load and on the fee you set when sending.

Manual processing and payout

The payout to a Sberbank card takes 30 minutes to 72 hours. If you need a faster payout, the form offers the paid “Urgent payout” option.

If the wait is taking too long

1. Find the TXID and check in a block explorer whether the transfer is confirmed.
2. Compare the address and the amount in the transaction with the order details.
3. If everything matches but the payout time has passed, write to support with your order number and TXID.

Do not send LTC again.

Fees for exchanging LTC to rubles

BTCChange24 does not charge a separate fee for the exchange: it is included in the rate. The form shows the final amount you will receive before you create the order.

Costs on the sender's side

Sending LTC involves a network fee, and its size depends on your wallet and the network load. When withdrawing from an exchange, the exchange may also charge its own withdrawal fee. None of these payments go to the exchanger.

Paid options in the form

• “Payment receipt”;
• “Urgent payout”;
• “Receive in one payment”;
• “Payment to a third party”;
• “Tip for the service”;
• “Fixed rate”;
• “Priority support”.

None of them is required. How the selected options change the total is shown in the form before you create the order.

How to enter the recipient's card details in the order correctly

The rubles will be sent to the details from the order, so a mistake in any field costs more than the minute it takes to double-check.

• Card number. Take it from the Sberbank app or from the card itself, and enter digits only.
• Cardholder's full name. Write it in full, exactly as it appears at the bank. If the card is not in your name, look at the “Payment to a third party” option.
• Linked phone number. Enter the number that is linked to this specific card.
• Telegram or WhatsApp. The operator will contact you about the order through this messenger.
• E-mail. Enter an address that you actually read.

If you notice a mistake after the order is created but before you have sent any LTC, do not send the coins: create a new order or write to support.

Safety when exchanging Litecoin for a card

Take the LTC address only from your own order

Use the address from the page of your current order, not from past exchanges or old chats. Each order is handled separately, so an address from an old order does not work for a new one.

Fake operators in messengers

If someone posing as an “employee” messages you privately, sends a different address, or asks you to change the amount, do not reply and do not send any coins. Contact the exchanger only through support on the site or in Telegram via the link on the site.

No banking secrets are needed

The order fields are enough for a payout to a card: the card number, the cardholder's full name, the linked phone number, Telegram or WhatsApp, and your e-mail. The exchanger does not need the card expiry date, CVC, PIN, SMS codes or your internet banking password, and you should not share them with anyone.

Whose card is it

A payout to the wrong card is hard to reverse, so check the card number and the cardholder's name before you send LTC. If the rubles are meant for another person, use the “Payment to a third party” option and verify the recipient's details.

What to do if the LTC to ruble exchange does not go as expected

The transfer was sent, but there are no confirmations

Open the TXID in a block explorer. If the network fee was set low or the network is congested, the transaction may take longer than usual to confirm. Wait for the confirmations and do not send the coins again.

More was deducted from the exchange than reached the exchanger

If the order states one amount but a smaller amount was sent to the network, for example because of a withdrawal fee, write to support. Include the order number, the actual amount and the TXID, and do not send the missing LTC on your own.

Fewer rubles arrived than in the initial estimate

The rate floats and is locked after the required number of confirmations, so the result may have changed with the market. To know the amount in advance next time, enable the “Fixed rate” option.

There is a mistake in the card number or the cardholder's name

If you have not sent any LTC yet, simply create a new order. If the transfer is already on the network, contact support right away, before the payout is made.

The order is complete, but the money is not on the card

Check the transaction history in the Sberbank app. If there is no incoming payment, tell the operator your order number and the payout date.

Questions about exchanging Litecoin for rubles

In short: exchanging LTC for card at BTCChange24

In short, you send LTC and receive rubles on your bank card. Before you send, check the LTC amount, the ruble calculation, the card number and the deposit address from your order. Keep the TXID until the payout reaches the card, which takes 30 minutes to 72 hours.